Vanagon Syncro steel wheel

6Jx14, ET30, ball set.

944 phone dial rim

Front 16x7J, ET52, Ball set

Rear 16x8J, ET52, Ball set

to fit on a Vanagon, need a spacer transform 5H112 to 5H130, with thickness 20mm or more.

Fit Blaupunkt Stereo on Vanagon Carat

Fits perfectly, BLAUPUNKT CASABLANCA CM 62

Measurement log of fitting W211 rim on Vanagon T3

W211 forged wheel on T3

16", 5H112, 7.5J ET33, 肉厚 9mm, thickness 9mm, Ball set

前輪離羊角有段距離, 免墊片, 有墊片或修改grees cap時中心標可上.

後面可免墊, 但無法直上中心標, 須加墊片才能上中心標. 螺栓需加長.

Dry fit, no spacer

須加墊片才能上中心標. 螺栓需加長.

need a spacer for fitting center cap, and longer bolt of course.

前輪離羊角有段距離, 免墊片, 有墊片或修改grees cap時中心標可上.

Still has some space from upper arm, 

 這框比較斯文, 適合美規車
look good on Carat. but not on Syncro.

後面可免墊, 但無法直上中心標, 須加墊片才能上中心標. 螺栓需加長.

Still has some space from rear control arm, spacer is not necessary if certer cap is not considered.

後輪不會超過輪拱
Wheel did not exceed body.

Measurement log of fitting W220 rim on Vanagon T3

W220 forged wheel on T3

16", 5H112, 7.5J ET46, 肉厚24mm. thickness 24mm, ball set.

前輪已卡住羊角, 要墊15mm 左右, 有墊片時中心標可上.

後面可免墊, 中心標小修改可上. 螺栓需加長.

Dry fit, no spacer

前輪已卡住羊角,,要墊15mm 左右, 有墊片時中心標可上.

from wheel touched upper arm, need a 15mm spacer at least on Vanagon, not sure if it is the same on a Syncro.

這匡比較適合四傳+AT胎.

It will be looking good with AT tyre on Syncro.

後面可免墊

no spacer for rear wheel.

沒墊片時不會超過輪拱.
Wheel will not exceed body.

Picture log of futureVSS location

Vanagon Carat 3AT tranny, driver side, where speed sensor will be fitted.

6 pulses a turn.

Sensor will be a proximity sensor, which sense bolt on transaxle.

EJ22 on a 96 Subaru Legacy, run 13k km already still very smooth.

mobile Lab on Vanagon Carat, testing GPS speedo and digital tachometer

Test GPS speedometer

Test digital tachometer.