Measurement log of fitting W220 rim on Vanagon T3

W220 forged wheel on T3

16", 5H112, 7.5J ET46, 肉厚24mm. thickness 24mm, ball set.

前輪已卡住羊角, 要墊15mm 左右, 有墊片時中心標可上.

後面可免墊, 中心標小修改可上. 螺栓需加長.

Dry fit, no spacer

前輪已卡住羊角,,要墊15mm 左右, 有墊片時中心標可上.

from wheel touched upper arm, need a 15mm spacer at least on Vanagon, not sure if it is the same on a Syncro.

這匡比較適合四傳+AT胎.

It will be looking good with AT tyre on Syncro.

後面可免墊

no spacer for rear wheel.

沒墊片時不會超過輪拱.
Wheel will not exceed body.